Coatings, Primers & Binders for Decorative & Industrial Surfaces

Stobicoat® N

Creating toughness and resiliency for walkways, driveways, Industrial & play surfaces

The Stobicoat® N product range consists of aliphatic one and two-part, stone carpet binders and coatings for outdoor and indoor use for decorative, long-lasting, durable and porous resin-bound surfaces. Sustainable urban drainage systems (SuDS) can be achieved provided the subbase is also porous. In addition, our binders are used with kiln-dried aggregate blends such as quartz, granite, marble or blends with recycled rubber mixed using a force-action mixer at the required ratio of stone binder to aggregate. Anti-slip properties can also be improved by utilizing a finishing broadcast of fine crushed glass.

Other supplemental products are available to aid installation, including:

Catalysts to shorten the cure times during cooler installation temperatures
Stobielast® S solvent based and solvent free primers for subbase preparation before overlay of the decorative stone carpet
Stobiblend Z troweling aids for longer troweling intervals before cleaning and to provide improved surface-smoothing action

The Stobicoat® N product range also includes a hybrid, aromatic, two-part, stone carpet binder recommended for use with darker aggregate blends where discoloration (ambering) is not as noticeable. This also serves as a lower-cost alternative when an aliphatic binder is not required.

Typical stone carpet surfaces that use Stobicoat® N include, but are not limited to:

Car parks
Roads
Driveways
Patios
Pathways
Steps
Tree pits
Pool surrounds
Other water permeable drainage systems with aesthetically pleasing surface finishes

Stobicoat® N Products

The products listed are only a sample of what we can provide in the Stobicoat® N portfolio and may be produced in select locations. Please consult with your STOCKMEIER Urethanes representative for specifics. All products have superior processing attributes that optimize efficiency making them truly the choice of the professional. Let us help you find and develop the perfect solution for your application.

1K Aliphatic (UV) – Single-Component

Stobicoat® N 2070

Superior aliphatic UV-grade binder for optimum color stability
Single component - no pre-mixing required with individual components
Rigidity of cured resin provides extreme toughness to bound aggregates
Better viscosity stability at colder temperatures
Useable for all installation types
Packaging starting at 5.8 kg (12.7 lbs)
Solvent free

Stobicoat® N 1830

Superior aliphatic UV-grade water-based industrial coating for optimum color stability
Single component - no pre-mixing required with individual components
Flexible and tough with high hiding-power at low consumptions
Fast drying for quick recoating and handling
Available in multiple colors
Packaging starting at 20 kg (44 lbs)
Isocyanate & solvent-free with ultra-low VOC

Stobicoat® N 1822

Aliphatic UV-grade water-based coating for sealing and protecting EPDM/SBR mats for optimum color stability
Water clear once dried
Available in low and high viscosity for prefabricated mats and PIP applications
Abrasion, stain and chemically resistant
Fast drying for quick recoating and handling
Packaging starting at 19 kg (42 lbs)
Isocyanate free

Stobicoat® N 2075

Aliphatic UV-grade binder for enhanced color stability
Single component - no pre-mixing required with individual components
Rigidity of cured resin provides extreme toughness to bound aggregates
Useable for all installation types
Packaging starting at 5.8 kg (12.7 lbs)
Solvent free

Stobicoat® N 889

Superior aliphatic UV-grade roof coating for optimum color stability
Single component - no pre-mixing required with individual components
NOA No.: 22-0316.02, Miami-Dade County, Florida, 01/19.28 Approved
Cool Roof Rating Council (CRRC) approved product
761% elongation
Primer, fabric and bleed block not required
Extremely user friendly with low isocyanate content
Packaging available in 5 gallons, 55-gallon drums or 220 gal totes
Adheres to all nine roof coverings from SBS mod bit to TPO
Contains solvent

2K Aliphatic (UV) – Two-Component

Stobicoat® N 2067

Aliphatic UV-grade binder for enhanced color stability
Two-component with easy to mix components
Useable for all installation types
Kit sizes starting at 6.5 kg (14.3 lbs)
Solvent free

Stobicoat® N 1831

Non-yellowing epoxy membrane for sealing and dissipating moisture vapor emission (MVE) in concrete substrates
Two-component with easy to mix components
High compressive, flexural and tensile strength
Excellent adhesion to concrete and less sensitive to moisture during cure
Not a substitute for a functioning vapor barrier beneath slabs
Not a suitable primer for the use of glues and mastics
Isocyanate free and ultra-low VOC

Stobicoat® N 2072

Economical aromatic non-UV grade binder
Two-component with easy to mix components
Recommended for use with darker aggregate blends where color stability isn’t critical
Useable for all installation types
Kit sizes starting at 7 kg (15.4 lbs)
Solvent free

Supplemental Products

Stobielast® S 080

Solvent-free primer for asphalt or concrete

Stobiblend Z 1966

Catalyst for accelerating cure
Assists cure below 15 °C (59 °F)

Stobiblend Z 967

Non-toxic & non-flammable troweling aid
Used on trowel equipment to provide smoother surface finish
Low usage required with improved spread rate

Stobielast® S 100

Solvent-based primer for asphalt or concrete

Stobiblend Z 1967

Catalyst for accelerating cure
Assists cure below 15 °C (59 °F)

Stobicoat® U Products

Stobicoat® U polyurea products offer a wide range of uses. Their fast reactivity makes these products particularly useful for large surface projects such as pipelines, flooring and parking decks, bridges, tanks, roofs, wastewater treatment linings and truck bed liners.

Stobicoat® U 841

Aliphatic UV-grade polyurea elastomer for enhanced color stability
Excellent chemical resistance and weathering stability
Two-component with easy to mix components
Spray applied
Useable for all installation types
Solvent free
Superior adhesion to a wide variety of substrates including, but not limited to, steel, concrete, foam plastic and molded rubber parts

Stobicoat® U 845

Aromatic polyurea elastomer
Excellent chemical resistance and weathering stability
Two-component with easy to mix components
Spray applied
Recommended for use where color stability isn’t critical
Solvent free
Superior adhesion to a wide variety of substrates including, but not limited to, steel, concrete, foam plastic and molded rubber parts